mpms_squid_magnetometer
차이
문서의 선택한 두 판 사이의 차이를 보여줍니다.
| 양쪽 이전 판이전 판다음 판 | 이전 판 | ||
| mpms_squid_magnetometer [2022/10/01 23:42] – jyh | mpms_squid_magnetometer [2023/06/16 16:10] (현재) – yjchoi | ||
|---|---|---|---|
| 줄 6: | 줄 6: | ||
| - MPMS 관련 문제, 해결책, 원인에 대해 기록하자. | - MPMS 관련 문제, 해결책, 원인에 대해 기록하자. | ||
| * Dewar pressure overshooting and/or undershooting | * Dewar pressure overshooting and/or undershooting | ||
| + | * MPMS Pump 소음과 더불어 Fan의 고장 (2023.06.16) | ||
| === History of He regeneration by Evercool system === | === History of He regeneration by Evercool system === | ||
| - He regeneration 이력을 기록하자. | - He regeneration 이력을 기록하자. | ||
| * 2022.06.06, target He level: 63% | * 2022.06.06, target He level: 63% | ||
| + | |||
| + | === *** Important things for MPPS prior to do characterizations === | ||
| + | * There are two fundamentally different control mechanisms used in the system. The normal mechanism is used for all temperatures above about 4.4 Kelvin, while below this temperature, | ||
| + | * Note: The crossover temperature, | ||
| + | * The helium consumption in the system is approximately 4.5 to 5 liters/day when running the system below about 200 K, increasing to about 6 to 7 liters/day when running at room temperature. While the MPMS dewar has a 56-liter capacity, the superconducting magnet in the system requires the liquid helium level to be at least 35 to 40 percent to operate. Hence, to operate at the highest fields, the liquid helium should be replenished every 5 to 6 days. | ||
| + | * Verify that a helium-gas supply cylinder is attached to the EverCool manifold supply port with a stainless steel hose and that the cylinder pressure is regulated from 5-30 psi (35-210 kPa). | ||
| + | * Check the Helium Level in the chamber at least over 57%. | ||
| + | |||
| === Maintenance checkpoints === | === Maintenance checkpoints === | ||
mpms_squid_magnetometer.1664635348.txt.gz · 마지막으로 수정됨: 2022/10/01 23:42 저자 jyh